wholesale aluminium sliding window handle manufacturer, supplier, factory, exporter, wholesaler for sale

The aluminium sliding window handle can lock doors and windows and are generally very secure. However, after a long period of use, the handles fixed by screws are likely to become loose. So how to remove the window handle? How to install the new handle? What are the precautions during the installation process? Let's discuss it together below.

aluminium sliding window handle -- Panda

Installation method of aluminum sliding window handle

• Drill a hole in the narrow edge of the window-at the height you want to place the window handle. This hole will be used for the latch that keeps the window closed.

• Fix the latch position on the hole of the window. When looking horizontally, you should be able to see the hole through the latch plate.

• Use a pencil to draw the shape of the surrounding board on the window.

• Remove the latch plate, and then use a hammer and chisel to remove the wood in the marked area. Make sure it is as deep as the thickness of the latch plate. Once completed, the panel should be flush with the edge of the window.

• Use a drill bit to drill the hole, and the window handle will be placed on the window. Go all the way to the other side of the window.

• Reposition the latch plate and mark the two screw holes with a pencil. Drill a hole and insert the latch, then screw in the latch plate.

• The window handle has two parts, which are usually connected together with two long screws. Insert the window handles into both sides of the window, making sure to line up the screw holes and the center locking mechanism latches. These latches should fit the inside window handles.

• Finally, install the window panel on the window frame and lock it. Use a pencil to trace the striker board and chisel out the wood from the window frame. Use a drill to make a hole in the middle where the latch enters. Screw in the striker, then open and close the window to check that everything meets the requirements.

Precautions for installing window handles

The handle is installed vertically on the upper corner of the window panel. This installation method is the choice of most people. The upper part of the window panel is installed with a handle, and the lower part of the window panel is installed with a handle, which can be used directly without adapting to the opening direction of the window panel. There is also no need to bend over and open when opening the cabinet window. The wall cabinet windows are also effortless.

The handle is horizontally installed on the corner of the window panel. Many people like to install it this way. You can see which direction the window is opening when you first use it, and you can directly operate it. Some people are eager to operate when cooking, and you don’t need to hang the small shovel used for cooking. The window handles that open the window, and when the meal is finished, I retract the small shovel.

The handle is horizontally installed on the corner of the window panel. Install it in the middle of the window panel, and if you add the old copper-colored handle, does it have a retro feel, adding a sense of maturity to the pastoral style just now. The disadvantage is that this is not particularly convenient during use, and it takes time to adapt.

How to remove the former aluminium sliding window handle?

• Open the back cover of the handle and you can see the fixed screws inside.

• Turn the outer cover 90 degrees.

• Use a screwdriver to remove the screws inside.

• Then, please pay attention to pull out the handle forcefully; if it fails, don't be brute, shake it and try again; or close the window and pull the handle to 180 degrees, which will be easier.

• With this operation, the handle can be pulled out.

By the way

We are wholesale aluminium sliding window handle manufacturer, supplier, factory, exporter, wholesaler for sale, we are continually providing high quality aluminium and its derived products in the market. Welcome to contact us by 309467925@qq.com.