wholesale window sliding door roller manufacturer,supplier,factory,exporter,wholesaler for sale

Almost all the families use window sliding doors. However, we usually meet this kind of situation that the window will get stuck. There are many causes to the failure of window sliding doors. The main reason of this is the problem of the window sliding door rollers . As a result of that we often open and close the window, the window sliding door rollers may be broken. Then what if the window sliding door fails to work?

What should we do if the window sliding door roller are broken?

Remove the sliding door

When the sliding door of the balcony breaks down, there is usually a problem with the roller. In the maintenance, our first step is to remove the sliding door. How should we deal with it?

1. First, lift one end of the sliding door perpendicular to the ground with one hand, sweep the lower part of the sliding door pulley with one hand, and lift the pulley.
2. Then lift one end of the sliding door out of the track and put it down.
3. Similarly, lift the other end of the sliding door of the balcony out of the track.
4. Then hold both ends of the sliding door with both hands and lift it up. In this process, we should pay attention to safety and do what we can.

Remove the faulty roller

For the removal of the sliding door pulley, it is suggested that the door should be placed flat on the ground first, and then observe the sliding door. Usually, there is a wool strip at one end of the door frame, some are directly adhered to the door frame, and some are adhered to the door frame. For the wool strip adhered to the door frame, just pull it apart and pull it to the second screw hole, The screw hole at the bottom is the screw hole for the fixing screw of the sliding door pulley, and the screw hole above is the screw hole for fixing the aluminum alloy frame. At this time, press the sliding door roller with one hand, use tools to remove the screws, and then pull out the roller. This is to remove the sliding door roller. Other upper and lower roller are the same disassembly method.

Install a new roller

Set up the roller at the upper end of the sliding door, insert a wrench into the round hole where the roller has been removed, and screw in new screws. Push the upper roller into the gap between the screw cap and the inner wall of the door frame. In order to keep the upper pulley at a certain distance, clamp a piece of cardboard between the upper edge of the door frame and the plane of the upper roller, and then tighten the screws. After the installation of the upper roller, remove the cardboard, and the replacement of other pulleys is the same. Fix the roller through a screw, take out the old roller, and then replace the sliding door roller.

Who is reliable supplier?

Foshan Yongyingfeng Buliding Material Co., Ltd.is one of the leading wholesale window sliding door roller manufacturer and supplier and exporter and factory and wholesaler in China. The customer service is great. Feel free to contact with it.